1.clone Keyline4D,TPX2 ,AT52
2.Clone 46 chip via AT61 ,
3.AT61 is the same size with Philips 46 chip
4. Just Read ,and copy, 2m to clone the 46 chip
5.electronic heads are batteryless: therefore, it is not necessary to replace the batteries or make a new copy when the expiry date is near.
6 . AT61 is the Autokey solutions for the duplication of the Philips Crypto code Transponder.(46 chip)
TS888 46 Clone Machine
TS888 Adaptor TS06 chip AT61 chip
1. Manual Instruction
a. Switch on, “ TS888 Boot loader , Version1.15 -à Ready to read “.
b. Read the customer’s 46 key-à” Tag 46 Press Read/copy“.
c. Press Copy to do the clone .-à“ Input TS06/TS46 Press copy“
d. Insert the TS06 chip ,Then Press copy.-à“ Write Ok Sniff Immo Data“
e. Take the TS06 go to the car. Insert the keyblade into ignition,then turn on,off for 3-5 times. Back to the machine. ( That is for collect the Key password)
f. Insert the TS-06,Press Read -à“TS-06 Step1 Ok, Press Read/copy“
g. Press Copy to do clone. -à“ Copy or Delete Rd=No Cp=Yes“ (Delete means reset TS-06, copy means to do clone)
h. Press Copy -à “ Copy or Delete Cp=copy ,Rd=Del“
i. Press Copy -à“ Start Crack Rd=No CP=Yes“
j. Press Copy - -à“ TSH settting please wait->TSH setting 01%....50%.....100%“
k. Then-à“ 2-09 Crack Ok, “AAAAAAAAAAAAAAA“ (AAAA means the key password)
l. Press Read-à“ Input Origional Key Press Reading“
m. Insert the customer’s key, then Press Read“ Input TS06/TS46 Press Copy“
n. Insert AT61 chip inside ,then Press Copy-à“ Write Ok, Press Read/Copy“
Attention: 1.In the case TS06 doesn’t work please Reset it. Read TS06 first-“TS06 step 1 ok,Press Read/copy-à“copy or Delete Rd=No CP=yes” Press Copy-à”Copy or Delete CP=Copy Rd=Del” Press Rd-à” Blank TS06 ‘
2. in the case Writing Error During the Write with AT61. please change another AT61,try again. Still doesn’t work. Don’t try again.that means can’t clone.