|
| |
|
Key Marcaters |
|
|
|
|
 |
To
personalize keys with your own name. Prints in one easy action up to a maximum
of 32 digits on two lines, 16 digits per line.
|
|
AVH0101
Key Marcater
|
Price: US$335.95
|
 |
 |
Marker
of letters and numbers to be compounded.
Size of engraving 2x3 mm. |
|
AVH0112
Compound
|
Price: US$595.95
|
|
 |
Stamping dial can be selected to stamp shop's
name & tel...... numbers to make shop well-know in the market.
 Three different stamping
boards can be changed upon the..... different shape of keys' head & groove. Easy
operation &..... save times.
Special design structure can skip to next stamping
position..... automatically after finishing a letter
stamping.
Stamping Dial contains 40 letters : English letters A~Z,
..... figures 0~9 & punctuation marks
 .
The dimension of letter is 2mm in Height, 1mm in Width,
..... Pitch 1.4mm.
|
DIMENSIONS : |
 Width |
180mm |
|
Depth |
300mm |
|
Height |
400mm |
|
Net Weight |
8kg |
|
Gross Weight |
8.5kg |
|
Measurement |
0.9 Cubic |
|
|
|
|
GL-03
Stamping dial
 
|
Price: US$795.95
|
|
|
|
 |
|
The Stamp Aligner™ solves the problems
locksmiths have always had while stamping numbers on keys. Crooked numbers,
stamps flying across the room, and numbers that go up, down, and all around are
now things of the past. The Stamp Aligner™ holds the stamps so that figures
may be stamped on keys in a straight line with even spacing between characters.
The Stamp Aligner™ has 7 detents to stamp up to 7 characters evenly on a key.
A key is placed onto the bottom part of the
Stamp Aligner™ and secured in place. The top part of the Stamp Aligner™ is
moved into one of the spacing indexes. The stamp is placed into the square hole,
over the spot where the key is to be stamped. The stamp is held securely in
place for it to be struck by a hammer. Spacing is clearly defined by a
spring-loaded detent built into the device. Each character stamped on the key
will be straight, spaced evenly, and aligned perfectly. When the stamps are all
struck with the same force, the result is a key that looks like it was factory
stamped. Letter and Figure
Stamps are sold separately.
|
|
SA-7 Stamp Aligner
|
Price: US$245.95
|
|
|
|
Letter sets include "A" through "Z", plus an ampersand
(&).
Figure sets include numbers "0" through "8"
(Use the "6" upside-down for a "9".)
Stamps can be used alone or with the Stamp
Aligner™ (SA-7).
|
|
Hand Cut
Die Stamp Sets
|
Price: US$79.95
|
|
|
|
|
Permanently mark master or
restricted keys with HPC's Specialty Locksmith Stamps. Let other
locksmiths and key duplicators know it is a special purpose key and is part of a
restricted system. The stamps are made of heavy duty steel stock, 3/8"
(9.5mm) x 5/8" (16mm) with 1/16" (1.57mm) characters, hardened and
flash-chromed for years of trouble free service.
No. LDND
DO NOT DUPLICATE
No. LDNC
DO NOT COPY
No. LMS
MASTER
No. CUSTOM YOUR WORD 10 Characters
Your characters not more than 10
|
|
Specialty Locksmith Stamps
|
Price: US$62.95
|
|
|
|
order tracking
